Saturday, February 5, 2011

Artillery - Part 2

The Gun Carriage Braces


In order to control the spacing and reduce the flex of the frame, the gun carriage needs bracing. Looking at pictures and painting of gun carriages, I generally see one at the end of the trail - horizontal to the ground - and one at the front - vertical to the ground - to support the gun barrel. Additionally there are one or more in the center, sometimes as a box. As you can see, I added a simple brace to support the center, and the back of the barrel. I'm not trying to be accurate here; this is a representation of a Napoleonic artillery piece.


I found that simply gluing the braces was not enough. There was still too much flex, which in turn caused the bond to break. Out came the drill. As I have been doing with my figures now, for example with the arms, I drilled holes through the carriage into the braces, then inserted the dowels. I used wire snips to cut the dowels shorter.

A side effect of using the wire snips, which pinch the wood before it cuts, is that the dowel ends look like rivets. So, I won't file these flat.


Another view of the gun carriage, showing the front brace.


The Barrel Support

The barrel is supported on the gun carriage by bars on each side of the barrel, which rest on a depression of the gun carriage. For the bars I drilled a hole through the barrel from one side to the next and glued a dowel into the hole.


I sanded a depression into the gun carriage over the axle.


I then sanded a depression into the forward brace so the gun barrel can rest on it.


Here is the final assembled artillery piece. I've placed one of my figures to the right to show it for comparison purposes. From a height perspective, this piece is probably appropriate for field artillery, while the barrel is more proportioned for heavy artillery, like a 12 pounder.


That said, I am happy with the piece and it will serve as an interesting center-piece for a skirmish scenario.

Next up: paint it as a French artillery piece.

4 comments:

  1. Magnificent stuff! Will the next one be a firing model?

    ReplyDelete
  2. Looks great. Maybe you could add some little wire handles to the barrel and trailer...and a bucket hook. Mind you, that might detract from the nice clean design. No...forget it..it looks great as it is :-D
    Cheers
    paul

    ReplyDelete
  3. You mean like in H. G. Wells "Little Wars" where the cannons shoot matchsticks at the figures? Um, no. Nothing is going to be shot at my babies! :)

    ReplyDelete
  4. The handles on the barrel are important, I think, and should be easy to do if I can ever find a staple the right size. Last time I was in the hardware store I forgot to look as I was clamoring for PVC to fix some burst pipes, so my mind was elsewhere.

    ReplyDelete

Contributors

Followers

Blog Archive

Popular Posts

Labels I Use in Posts